Introduction¶

Rigs Of Rods Bus Controls
Rigs Of Rods Monster Truck Controls
Rigs Of Rods Controls
Videos For Rigs Of Rods Controls
Rigs Of Rods Excavator Controls

The name is historical - Rigs of Rods was originally a heavy truck simulator, other kinds of vehicles came later. Recognized filename extensions for this format are:.truck,.car,.boat,.airplane,.train,.machine,.trailer,.load,.fixed. Note the extension is only informative, the actual type of. This MAY work for 4.8.I HAVE NOT TRIED IT SO DON'T QUOTE ME!Thanks!SubscribeLikeComment If it workedLet me know what i can improve.

Rigs of Rods (RoR) is a free/libre soft-body physics simulator mainly targeted at simulating vehicle physics. The soft-body physics system is based on mass-spring-damper theory.

This page will help you learn the basics of Rigs of Rods, from your first run to playing multiplayer.

First Run¶

When launching RoR for the first time, the user directory will be created. On Windows this is located at DocumentsMy GamesRigs of Rods or at ~/.rigsofrods on Linux. This is where configuration files, logs, and mods are stored.

The game should open in a small window:

Before playing, you should first change your settings. Begin by clicking Settings.

First, make sure the rendering system is set to Direct3D9 Rendering Subsystem. If it's set to OpenGL Rendering Subsystem, change it then restart RoR. If Direct3D9 doesn't appear on the list, install the DirectX Runtime and restart your PC.

If you're running Linux, ignore this as DirectX is not available.

Now select Video Mode and change it to your monitor's native resolution then restart the game to apply your changes.

Click Settings again, then click the Graphics tab.

The following settings should be fine for most people, but feel free to adjust them to fit your liking.

Then click the Audio tab and set the device and volume.

Once you're finished, restart the game again.

Now you're ready to begin playing. Start by clicking Single player to open the terrain selector.

For the sake of this tutorial, select North St Helens.

Once the terrain loads, you will spawn as a country person known lovingly as RoRBot. You control him with the arrow keys while using SHIFT to run and SPACE to jump (good for getting over bumps, or if you get stuck).

You spawn in front of a building known as the Rig-a-Deal. This is where you will spawn new trucks. Walk into the 'Office' to bring up the selection menu. You can also spawn a vehicle anywhere at any time by pressing CTRL+G.

Use the mouse or arrow keys to move through the menus. Select the DAF Semi truck. The truck spawns inside the Rig-a-Deal with you inside it. If you happen to spawn the truck with RoRBot outside of the vehicle, simply hit ENTER/RETURN to get in a vehicle.

Driving¶

The DAF semi isn't the most agile or best looking truck in the game, but it serves us a purpose later. The camera inside the Rig-a-Deal is fixed, so you will be unable to move it until you leave. Switch to the in-cab camera by hitting C. Use the UP arrow key to accelerate out of the Rig-a-Deal (Rigs of Rods uses a simulated clutch which begins to engages at a specific point. This why the semi doesn't move until 1000 RPM). Use DOWN to brake, and LEFT/RIGHT arrows to steer. Use PGUP/PGDOWN to select your transmission direction/speed.

Start by exploring Coldwater, the town you begin in. It isn't very big but provides some decent moving room. If you get stuck, or wreck, hit I to reset back to the Rig-a-Deal, or BACKSPACE to reset the truck in its current position.

If you hold BACKSPACE for one second, you will enable the 'advanced repair mode' which lets you move the vehicle to any position by using the WASD keys to move and the arrow keys to rotate. Press BACKSPACE again to exit.

You can switch transmission modes by hitting Q. There are 5 transmission modes available: * Automatic shift * The gear change is fully automatic, the player only has to set the gear by pressing PGUP/PGDOWN. * Manual shift: Auto clutch * The gear is changed on user request. No clutch should be pressed to change gear, vehicle takes care of that. Just use A and Z to shift. * Fully manual: sequential shift * The user must press clutch and select whether it is needed to switch up or down. Depress the clutch by hitting LEFT SHIFT, then press A to upshift or Z to downshift. * Fully manual: stick shift * This mode is useful if you have a game controller with an H-shifter (like Logitech G27). In this mode the player can set gears 1-6, N, and R directly by the stick. * Fully manual: stick shift with ranges * This mode is mostly used in vehicles having more gears than 6. In this case you can select from 3 ranges: low (gear 1-6), medium (gear 7-12), high (gear 13-18) by pressing the appropriate button. Like if you want to select the 8^th gear, you have to select gear N first, press the midrange button, then select the 2^nd gear on the h-stick. Remember, range selection can be made only if the gear is in N.

If you stall, there are 2 keys to be remembered: X enables or disables the electricity in the vehicle, and S activates the starter. Press X and you'll see a yellow battery icon lit on the UI. Hold S until the engine is started. Resetting the vehicle with BACKSPACE or I will instantly start the engine.

Remember how to change the camera? Hit C twice. You're now in third-person view and can move the camera around. Use the number pad (specifically 2, 4, 6, and 8) to move the camera. Pressing 5 resets the camera. 9 and 3 zoom in/out respectively and 1 gives you a front view of your truck.

You can also move the camera by holding right-click and dragging with your mouse.

Now, make your way back to the Rig-a-Deal.

Trailer Loads¶

You should see a large, grey, open-platform with an orange console. Park the truck (use P to set the parking brake) and hit ENTER/RETURN to get out. Note that the same camera commands work with RoRBot. Step in front of the orange console to open the load selector.

Select the Semi trailer (37 tons).

Get back in the semi and drive in front of the load. Use the camera in third-person view to help you if you need. Back into the trailer. When you get close, use F1/F2 to lower and raise the trailer legs respectively.

The hook points must be within 10cm to hook, so it may take some practice to get close. When you think you're close, hit L. If you're close enough, the semi will latch to the trailer. Raise the legs by holding F1.

You can now drive around with the trailer. You will notice that the trailer has a large effect on how the semi pulls and handles! This process is the same for most trailers. In some cases you can secure loads to trucks using O.

NOTE: on some computers trailers may increase lag or decrease FPS(frames per second) dramatically!

Flying¶

Now that we've become comfortable with driving. Let's try to fly. Move your mouse to the to top of the screen to bring up the menubar, click Vehicles then Antonov 12 to instantly enter the plane which is sitting on the runway.

Apply the parking brake by pressing P. Turn on the flying lights by pressing M. Start the engines by using your mouse to click the ON buttons in the lower right

Rigs Of Rods Controls